CONTRACTOR GENERATOR SETS |
|||||
Portable POWER! |
|||||
Versatile, Lightweight, POWERFUL! Be ready for a Weather Blackout!!! Serves many uses for CONSTRUCTION, GARDENING, AGRICULTURE, MARINE, and hundreds of GENERAL PURPOSE jobs! |
|||||
|
|
|
|
|
![]() |
5.5 to 9.3 Kw Dedicated Single Phase Direct Coupled Diesel Engine for General and Standby Electrical Power |
|||||

STANDARD EQUIPMENT |
Air Cleaner |
Exhaust Manifold Muffler |
12 volt Alternator mounted on Engine |
12 volt Electric Starter |
3/4" or 7/8" Tapered Rear Shaft (SAE J609A) |
Mounted Generator (To Rear Shaft) |
Fuel Filter with Fuel Shutoff |
Cooling Air Blower and Guard |
Mechanical Governor Set for 3600 RPM |
Vibration Isolators |
1" Square Tubing Constructed Roll Cage |
8 Gallon Fuel Tank mounted on Roll Cage |
Weather Cover mounted on Top of Roll Cage |
Battery Tray & Cables |
Parts and Operators Manuals |
All Engine Lubricants Filled |
Engine Control Panel with Key Start & Charging Light |
Run Time Hourmeter |
Entire Unit Will Be Painted Gloss Black |
OPTIONAL EQUIPMENT |
||
5.5kw Unit |
6.0kw to 9.3kw Unit |
|
SERVICE PANEL |
SERVICE PANEL |
|
|
|
|
| SERVICE PANEL COMPONENTS
The service panel will include the engine key start panel, running hourmeter, magnetic Re-acting circuit breaker, 240 Volt (50 Amp) receptacle, two GFI protected 120 Volt (15 Amp) duplex outlets with reset and test. All the components will be mounted in a 14 gauge enclosure (15 1/2"L x 5 1/2"W x 4"D) located on engine service side. |
14 GAUGE STEEL ENCLOSURE |
|
| STEEL ENCLOSURE
CONSTRUCTION 14 gauge steel enclosure construction and will include fresh air inlets for both the engine and generator. It will be a hot air discharge outlet incorporated in the service door on the discharge side of the engine. The entire be a hot air discharge outlet incorporated in the service door on the discharge side of the engine. The entire enclosure and service doors will be primed and painted black to match the rest of unit. |
2 WHEEL DOLLY KIT |
| 2 WHEEL DOLLY KIT
The two wheel dolly kit will include two 10" pneumatic rubber tires, axle bar, front resting foot and two handles with plastic endcaps and foam grips. |
For engine sizing, application
assistance, price or availability: |
An Employee Owned Company
Copyright © 2007 Diesel Power Equipment Co.